SKU: TAV-PBPCON-2M

PowerCON Power Cable with Piggyback Plug (1.5m-10m)

Locking Neutrik PowerCON to piggyback AU plug, doubles power points

$86.00
Genuine Neutrik PowerCON, locking
Right-angle Piggyback AU Plug
10A, 240V, 2.6kW load capacity
1.5mm² 3-core, 99.99% pure copper
SAA Approved, RCM Marked for Australian Use
5-Year Warranty
Pay your way with Visa, Mastercard, AMEX, PayPal, Zip & Afterpay.

Parcel Post Delivery: $25.95

Note: Regional/remote areas may be subject to additional shipping charges. T&Cs.

Oversized Freight:

Please contact sales@titanav.co for a custom quote.

Note: See T&C's for further information. 

Description

Built for lighting techs and pro audio crews who need a locking, mains-safe power connection between the wall and the rig, this PowerCON power cable pairs a genuine Neutrik PowerCON connector at the equipment end with a right-angle piggyback AU plug at the wall. You double up on power points without stacking double adaptors, and the PowerCON locks into your fixture or amp so it won't pull out mid-show.

Wired with a 1.5mm² 3-core 99.99% pure copper conductor and an 8mm PVC jacket, it handles a full 10A and 2.6kW load without heat build-up. Every cable is SAA approved (certification SAA-170829-EA) and overload-tested at 10A before it leaves the factory, ready for Australian venues, theatres, touring rigs, and government sites where electrical standards get checked. 

Choose the Right PowerCON Power Cable Length

Pick a length based on the distance between your fixture or amp and the nearest wall outlet:

  • 1.5m–2m, rack-mounted gear, amp tops, and short stage patches
  • 3m, standard stage and FOH use, powered speaker runs
  • 5m, longer stage runs and lighting positions at the rear
  • 7m–10m, long runs to truss-mounted fixtures, distributed AV, and install work

On a busy show day, the right-angle plug sits flush against the wall, leaving room to power a second device from the same outlet, perfect for mixer-and-monitor, amp-and-fan, or fixture-and-hazer combos where socket real estate is tight. Designed in Brisbane, built for the gear PowerCON actually ships on.

Specifications

  • Selected Length: 2m
  • Lengths Available: 1.5m, 2m, 3m, 5m, 7m, 10m
  • Plug: AU 3-pin (AS/NZS 3112) with right-angle piggyback socket
  • Equipment End: Genuine Neutrik PowerCON NAC3FCA, locking
  • Conductor: 1.5mm² 3-core, 99.99% pure copper (16AWG equivalent)
  • Rated Voltage: 240V
  • Rated Current: 10A
  • Maximum Load: 2.6kW
  • Jacket: PVC, 8mm OD
  • Temperature Range: -20°C to +70°C
  • Compliance: SAA approved (SAA-170829-EA), AS/NZS 3112 & RCM Marked
  • IP Rating: None (indoor use only)
  • Colour: Black

Delivery & Pick-up Options

We offer Brisbane pickup from our Northgate warehouse, or delivery Australia-wide with clear, upfront pricing for most orders.

BRISBANE PICKUP

Free pickup is available from our Brisbane warehouse.
Orders are usually ready within 1 business day.

PARCEL DELIVERY — $15.95

For small, lightweight items within standard parcel limits (each item under 22kg and 1.8m).
Tracking details are sent once your order is dispatched.

BULK DELIVERY — $129

For large or heavy items that can’t be sent as a standard parcel.
Requires a forklift or suitable unloading equipment at delivery.

BULK DELIVER + TAILGATE — $199

For large or heavy items when unloading equipment isn’t available.
The truck uses a built-in lift to safely unload your order.

Upfront Delivery Pricing

Upfront delivery pricing applies to around 97% of orders. In rare cases where delivery access, size, or location results in higher carrier costs, we’ll always contact you before dispatch. No additional charges are applied without your approval.

For full delivery details, FAQs, and terms, see our Shipping & Delivery page.

SAA Approved, RCM Marked

Approved under SAA-170829-EA and RCM marked for Australian compliance. Tested at the full 10A rating before leaving the factory, making it a reliable choice for indoor AV setups, theatres, studios, and commercial installations where compliant equipment is required.

Why Choose Titan AV PowerCON Power Cable

Locking power. Genuine Neutrik. Backed for the long haul.

  • Genuine Neutrik PowerCON NAC3FCA, twist-lock connection that won't pull out mid-show
  • 1.5mm² pure copper conductor, full 10A load without heat or voltage drop
  • Right-angle piggyback AU plug, two devices from one outlet with no double adaptors
  • 5-year warranty, if it fails, we replace it

Reviews

FAQs

What's the difference between this PowerCON power cable and a PowerCON-to-PowerCON link cable?

This cable brings mains power from an Australian wall outlet to your first piece of PowerCON-equipped gear. A PowerCON-to-PowerCON link cable connects two PowerCON-equipped devices together to share power down a chain. Most rigs need both: this cable for the wall connection, link cables for daisy-chaining.

Will this work with all my PowerCON-equipped gear?

Yes, as long as your gear has a genuine Neutrik PowerCON NAC3MPA chassis input (the grey input, not the blue output). Most professional moving heads, LED fixtures, line array tops, active subs, and amp racks ship with NAC3MPA inlets. Check the back of your equipment before ordering.

What length should I choose?

Use 1.5m to 2m for rack-mounted gear and short stage patches, 3m for standard stage and FOH runs, 5m for longer stage and powered speaker runs, and 7m to 10m for long runs to truss-mounted fixtures. Add a bit of slack so you're not stretching cables across walkways.

What is the maximum load I can run through this powercon power cable?

The cable is rated at 10A, 240V, 2.6kW. Stay within that limit by adding up the power draw of every device on the cable, including any second device on the piggyback plug. Most pro audio and lighting gear lists wattage on the rear panel.

Is this cable suitable for outdoor use?

The cable is rated to -20°C and handles temporary outdoor use under cover, marquees, stages, or shaded positions. It is not IP-rated, so it shouldn't be exposed to direct rain or
used in permanent outdoor installations.

What's the warranty on this cable?

This cable is covered by a 5-Year manufacturers’ warranty.

1.5m PowerCON Power Cable with Piggy Back Plug
Titan AV

PowerCON Power Cable with Piggyback Plug (1.5m-10m)

From $81.00

Built for lighting techs and pro audio crews who need a locking, mains-safe power connection between the wall and the rig, this PowerCON power cable pairs a genuine Neutrik PowerCON connector at the equipment end with a right-angle piggyback AU plug at the wall. You double up on power points without stacking double adaptors, and the PowerCON locks into your fixture or amp so it won't pull out mid-show.

Wired with a 1.5mm² 3-core 99.99% pure copper conductor and an 8mm PVC jacket, it handles a full 10A and 2.6kW load without heat build-up. Every cable is SAA approved (certification SAA-170829-EA) and overload-tested at 10A before it leaves the factory, ready for Australian venues, theatres, touring rigs, and government sites where electrical standards get checked. 

Choose the Right PowerCON Power Cable Length

Pick a length based on the distance between your fixture or amp and the nearest wall outlet:

On a busy show day, the right-angle plug sits flush against the wall, leaving room to power a second device from the same outlet, perfect for mixer-and-monitor, amp-and-fan, or fixture-and-hazer combos where socket real estate is tight. Designed in Brisbane, built for the gear PowerCON actually ships on.

Length

  • 1.5M
  • 2M
  • 3M
  • 5M
  • 7M
  • 10M
View product